5
6

6 Axis Robotic Antenna measurement System

Technical Specifications:

  • Frequency Range: DC to 110 GHz
  • Maximum Arc length : 2.5mtr
  • Positioning repeatability: ±0.05 (mm)²
  • Payload Capacity : 50 lbs- 10,000 lbs
  • DUT Test Size: 10cm – 2.5mtr
  • Drive motor: AC Servo motor
  • Speed of operation : Upto 887°/sec

DMC 360 Software features :

  • Passive measurement (magnitude and phase)
  • Active measurement (TRP, EIRP, TIS, EIS, EVM)
  • OTA 2G, 3G, 4G and 5G Testing
  • OTA Bluetooth and BLE TRP & TIS testing
  • OTA GNSS Testing
  • For all bands and common radio systems
  • (GSM, UMTS, LTE, LTE-M, NB-IoT) etc
Request Quote

DMC Robotic Arm

6 Axis Robot in Anechoic chamber

5
6

Frequently Asked Questions

1. What is a 6-axis robotic antenna measurement system?

A 6-axis robotic antenna measurement system uses a robotic arm to precisely position and move antennas or devices under test (DUTs) during RF and antenna measurement applications.

2. What is a 6-axis robotic antenna measurement system used for?

It is used for antenna characterization, OTA testing, passive and active measurements, and complex antenna measurement applications requiring flexible and precise positioning.

3. What frequency range does the system support?

The system supports antenna measurement applications across a frequency range from DC to 110 GHz.

4. What is the maximum arc length of the robotic system?

The 6-axis robotic antenna measurement system offers a maximum arc length of up to 2.5 metres, depending on the measurement setup.

5. What DUT sizes can the system accommodate?

The system is designed to support devices under test ranging from approximately 10 cm to 2.5 metres.

6. What is the payload capacity of the robotic antenna measurement system?

Depending on the system configuration, the robotic system can support payload capacities ranging from 50 lbs to 10,000 lbs.

7. What is the positioning repeatability of the system?

The system offers positioning repeatability of approximately ±0.05 mm, supporting precise and repeatable antenna measurements.

8. What measurements can be performed using the DMC 360 software?

The DMC 360 software supports passive measurements such as magnitude and phase, as well as active measurements including TRP, EIRP, TIS, EIS, and EVM.

9. Can the system perform Over-the-Air (OTA) testing?

Yes. The system supports OTA testing for 2G, 3G, 4G, and 5G, as well as technologies such as Bluetooth, BLE, GNSS, GSM, UMTS, LTE, LTE-M, and NB-IoT.

10. Can a 6-axis robotic antenna measurement system be customized?

Yes. The system can be configured based on specific requirements such as DUT size, payload capacity, measurement range, robotic positioning requirements, and antenna testing applications.

What Our Clients Say

There are no reviews yet. Be the first one to write one.

Submit Review